Home Company History

Electronic Thermostat
Flush Mounted Thermostat with Wiring Centre - Now Available!

 

                                     

For more years than we care to remember Wirerite have been making a traditional plastic thermostat

BUT THINGS HAVE EVOLVED..............

We now make a sleek aesthetic contemporary electronic version in a range of popular finishes to harmonise with other fittings and accessories in the room. 

If appropriate we can integrate them too!!

Central Heating Control:

With one PCB board the unit will operate in the usual manner of responding to the setting of the thermostat when the heating is "on".

With two PCB boards the unit can continue to sense when the programmer is in the "off" position.  This can be set to a fixed low position so the house never drops below a certain temperature.

Alternatively, the second board could be used to zone the property and therefore different areas can be controlled separately.

We are also able to bank together boards controlling as many rooms or zones as you require...... this may be useful in cases such as underfloor heating.

Hot Water Control:

With one cylinder stat the unit will operate in the usual manner of responding to the setting of the thermostat when the heating is "on".

The unit will support two cylinder stats, with the secondary thermostat placed at the top of the tank.  This will sense during the programmers "off" period to provide a small volume of hot water if desired.

Giving energy savings as only a small proportion of water is being heated.

Other Benefits:

The pre-wiring saves time and money on on-site installation.

The programmer cam be mounted on the cover if desired.

Compatible with all standard boiler, valve and programmer combinations.

 

 

Home ][ Back to Top]